| Step | | Procedure & Parts & Tools |
| 1 |
|
TURN TO REMOVE THE KNOB.
|
| 2 |
|
SLIDE THE BRUSH ROLL COVER OFF THE BRUSH DECK.
|
| 3 |
|
SET THE MACHINE UP ON THE KICKSTAND AND SLIDE THE BRUSH ROLL OUT OF MACHINE.
|
| 4 |
|
LOCATE THE BRUSH BEARING IN THE END OF THE BRUSH. CHECK FOR THE BEARING BEING LOOSE OR PROTRUDING FROM THE BRUSH ROLL. NOTE: THE BEARING SHOULD BE FLUSH WITH THE BRUSH.
|
| 5 |
|
LOCATE THE BRUSH BEARING (PULLEY) AND CHECK TO MAKE SURE IT TURNS AND MAKE SURE IT ISN'T LOOSE.
|
| 6 |
|
IF THE BEARINGS ARE OKAY, REVERSE STEPS 1 THRU 3 TO REASSEMBLE THE MACHINE.
|